Concrete Epoxy

Concrete epoxies are in stock year round. E-mail us with any special requests, or for further information on the products we carry.


MODERATE TEMPERATURE/STANDARD SET FORMULA
35°F - 110°F Application Temperature Range
Uses	Features
Anchor grouting-threaded rod, rebar	Convenient cartridge packaging-self mix
Dowels into concrete & masonry	Delivery system
Seismic anchoring & bracing	No manual mixing or job-site proportioning
Mounting injection ports & capping cracks	Manual or pneumatic dispensing systems
Injecting blind side cracks	High-modulus, structural, non-sag epoxy adhesive
Injecting load bearing structures	Available in bulk packaging & hand mix kits
Bonding concrete, wood and masonry	Cures at temperatures down to 35°F
Glue-lam beam repairs	100% solids epoxy
Pick-proof sealant for windows, doors, security bars, etc.

Choose from 2 convenient cartridge systems

16.5 oz. Side-By-Side Cartridge (Part #: HS-200-16)

Convenient cartridge for most job-site applications Readily dispensed by both pneumatic and hand dispensers Pneumatic dispenser converts to house 33 oz. cartridge for larger projects Other formulas also available

ULTRA HIGH STRENGTH EPOXY SYSTEM

If it's trusted by both the U.S. Navy and NASA,
you can be sure it's right for you.

ULTRABOND. THE SUPERIOR SYSTEM

Ultrabond represents the very best in epoxy technology. Its name captures the essence of its superb performance features and strength.

Every employee involved in the manufacturing process is a dedicated staff member trained to utilize the latest technological advances to ensure product dependability and performance.

Every component in every formula is the best we can buy.

Every step in the manufacturing process is an exercise in quality control.

For years, Ultrabond has been widely recognized as the industry's leading epoxy system. Ultrabond consistently outperforms other systems... and for good reason.

SUPERIOR BOND STRENGTH:

Ultrabond is the result of years of research and development combined with only the best of available raw materials.
Formulas are constantly analyzed to control and confirm uniform high quality.
Tested for superiority by U.S. Anchor's own team, as well as countless numbers of independent tests, including those performed by the U.S. Navy and D.O.T.s in several states.
Tests conducted by Martin Marietta for NASA showed Ultrabond outperformed all other competing systems.

Fast Cure Anchoring & Doweling Adhesive Speed Set 2 is available in 28 and 12 fl. oz. dual cartridge systems.
Dispensing Tools: Dual Cartridge Use: Both pneumatic and manual dual cartridge dispensing tools are available for the 28 fl. oz. cartridge. Manual dispensing tools are available for the 12 fl. oz. cartridge. Read and follow the complete instruction guide for anchoring and doweling.

Testing was performed in conformance to ASTM E488-96 and ICBO AC58 January, 1999. Testing used B-7 threaded rod and Grade 60 Rebar. Values shown are average ultimate values and are offered only as a guide and are not guaranteed in any way. A safety factor of 4:1 or 25% is generally accepted as a safe working load. Reference should be made to applicable codes for the specific working ratio. 5/8" and 7/8" Shear and Rebar values are interpolated.	Technical Data for Speed Set 2
	Shelf Life 12 Months
	Storage Conditions Below 80°F
	Color Concrete Gray
	Consistency Non-sag Gel
	Temperature Range 20°F - 120°F
	Mixing Ratio A: B (volume) 10:1
	Gel Time (60 gram mass @ 78°F) 7 Minutes2
	Minimum Bolt-Up Time (78°F) 1 Hour
	Gel Time (60 gram mass @ 35°F) 90 Minutes
	Minimum Bolt-Up Time (35°F) 4 Hours

Contact our sales department for pricing information.

Prices subject to change without notice!

Privacy Statement | Site Map | About This Site