Meridian, Idaho Branch (208)322-6800

Idaho Falls, Idaho Branch (208)522-3242

Call us for your job today – We service all local business!

Draining Solutions

Strip / Highway Edge Drain

Strip / Highway Edge Drain is used where a water collection system is needed or full area drainage coverage is not necessary or practical. It can replace traditional pipe and stone for drainage collection systems. Composed of a polymeric core surrounded by a non-woven fabric, this product features high flow capacities and reduced excavation needs. The lightweight strip drain costs less, drains better and is easy to install.

STRIP DRAIN APPLICATIONS

  • Athletic Fields
  • Residential / Commercial
  • Foundation Drains
  • Highway Edge Drains
  • Golf Courses
  • Any Location with Standing Water

Sheet Drains

MiraDRAIN® is a high-performance drainage composite consisting of a three-dimensional, high impact, creep resistance polymeric core, and a selection of engineered anti-clogging filter fabric. The filter fabric is factory-bonded on individual dimples of the molded core to minimize fabric intrusion into flow channels caused by backfill pressure. The fabric serves as a filter medium to prevent the passage of soil particles into the core while allowing sub-grade water to pass freely.

J-Drain SWD® (Site Water Drainage)

J-Drain SWD® (Site Water Drainage) is a composite turf drainage system consisting of a 3-dimensional, high flow, drainage core and a non-woven, needle-punched filter fabric. The filter fabric is wrapped and bonded to the drainage core, preventing intrusion of the filter fabric into the flow channels during the backfilling process. Soil particles are held back by the filter fabric allowing water to pass through to the drainage core allowing water to be collected and conveyed to the discharge point. Available in 12, 18, 24, & 36 inch widths. Roll lengths are 165 feet.

Trench Drain

This is a specific type of floor drain containing a dominant trough or channel shaped body. It is used for the rapid evacuation of surface water or for the containment of utility lines or chemical spills.

The Dura Slope trench drain system consists of lightweight, modular sections for easier handling and installation and reduced freight to the site. A built-in slope of 0.7% allows optimal flow rates to be maintained system wide; neutral sections are also available.

  • Load Rated: Up to Class D with appropriate grate.
  • Applications: Non-residential

Channel Drain

The NDS Pro Series is a lightweight Channel drain system with interlocking joints, so connections are made quickly and easily. The modular design offers flexibility as each 20″ section of channel can be snapped together for longer runs or divided down to lengths as short as 4″ for smaller, interlocking sections.

Lightweight parts connect easily to sewer and drain pipe and fittings or SCH 40 pipe and fittings, and side and bottom outlets can be connected anywhere along the channel run.

Locations

Meridian Branch
348 NW 13th Place
Meridian, Idaho 83642
208.322.6800 ph
208.322.2636 fax

Idaho Falls Branch
5190 S Heyrend Dr.
Idaho Falls, Idaho 83402
208.522.3242 ph
208.522.4012 fax

view our entire catalog